IDS-G1 BLE WI-FI GATEWAY
IDS-G1 is a gateway with Bluetooth low energy (BLE) and Wi-Fi connection without smartphones or special applications.
The IDS-G1 gateway collects data from the iBeacon, Eddystone, BLE sensor, and other devices. It sends data to a local or remote cloud server using HTTP/MQTT/mbed (ARM) log via Wi-Fi/Ethernet/Cellular.
It can be attached with a double-sided tape or with a self-tapping screw.
Supports input with DC 5.0В, 1A, micro-USB
10/100 Ethernet with 802.3af PoE network
Supports wireless firmware upgrade
Operating temperature: from -25℃ to 65 ℃.
Wi-Fi module based on the Mediatek MT7688 580 MHz 32-bit application processor
1T1R 2,4 GHz with PHY 150 Mbps, 802.11b/g/n WiFi data flow rate
Two USB 2.0 host connectors and one TF card slot
128 MB 16-bit DDR2 ram
16 MB SPI NOR Flash
RGB LED strip as a status led
OpenWrt, Linux distribution for embedded devices.
BLE module based on nRF52832 32-bit ARM® Cortex®-M4 64 MHz processor by Nordic company
Bluetooth 4.0 (only Bluetooth Low Energy).
1z-USB-connector, metal sheeting, and screws
|Power supply (Vcc)||
Maximum 5,5 W through DC
from -40℃ to 85℃
from -25℃ to 65℃
Maximum 95%, without condensation
|Power supply source (Vcc)||
DC 5.0 (+/- 5%)