The climatic protective cabinet ‘Shtil” SHTK-104 KN-02S (500) is intended for use of the computer, network, telecommunications, power supply operation, and other equipment. This hardware should be installed inside the cabinet with specified temperature requirements. 

The climatic protective cabinet ‘Shtil” SHTK-104 KN-02C is equipped with an air conditioner and a heater. It is specially intended for use of indoor heated places. The cabinet guarantees the stability to solar emission, rain, wind, dust, law, and high temperatures ( -40 up to +40 °С). Its ingress protection degree is 55. It is possible to design the cabinet with two doors at the request of the consumer. The first front door is equipped with an installed microclimate maintenance system and the second rearmost back door is equipped with a climate maintenance system.

Operating and construction features of the climatic protective cabinet “Shtil” SHTK-104 KN-02C:

• The cabinet body material is a 2mm iron plate painted in light grey color, RAL7035;Frame and inner guideways are made of zinc-coated steel;The arrangements of internal space for the installation of the hardware in a 19” body. Access to the cabinet fasteners is possible only after opening the door.The ventilation type is drainage.There is an air conditioner with a refrigerative ability of 500W for maintaining a specific microclimate. It is possible to install a more powerful air conditioner;

  A heating module;

  There are thermostats for adjusting the temperature of activating the air conditioner and the heating module; 

  A shaft lock plunger is available;

  Front access to the equipment; 

  A cable entry from the bottom of the cabinet through sealed lead-in MG-40 (there are 3 items), and MG-16 (there are 4 items); 

  Current protection;

  An operational height is 38U.

It is possible to order additionally to the complect of SHTK-104 KN-02C cabinet the following options:

• GSM modem; A supervisory program + ‘Shtil’ control logic (set, 1U height);A soleplate of the required height;A set of sensors (smoke, flood, door opening sensors, and others);A photodiode lamp (48B);Accumulator battery shelves and shelves for the hardware;

  Supporting brackets for the equipment (the carrying capacity of them is up to 100 kilos); 

  A preheating module (3U height).